CAN 2 Current (C2C) is a compact, solenoid-mounted microcontroller engineered for precise, closed-loop current control. Operating via CAN bus protocols, it supports both single and dual-channel configurations to seamlessly manage on/off and proportional solenoids.
Single-channel: Commands one coil.
Dual-channel: Commands two coils sequentially.
Please note that configuration depends on your operational requirements. Driving two coils simultaneously requires two separate single-channel C2C devices. However, if the coils are only ever controlled one at a time, they can be managed by a single dual-channel C2C.
CAN 2 Current Features
• Can be used with on/off or proportional
solenoids
• Available as either a single or dual
channel device
• ISOBus and J1939 compliant
C2C specifications
| Data | Value |
|---|---|
| Supply voltage | 9-36 VDC |
| Peak output current | 3 Amps |
| Continuous output current | 2 Amps |
| Idle current | 65 mA |
| Ambient temperature | -40° C to 90° C |
| ISOBus and J1939 compliant |
Auxiliary Valve Command is used to command current Auxiliary Valve Estimated Flow is used to provide current feedback |
| IP rating | 67 |
Dimensions
Single Channel
Dual channel
Connector types
| Product | Coil Connector | Cable Connector |
|---|---|---|
| Single Channel | DT06-2S | DT04-4P |
| Dual Channel | DT06-2S | DT04-6P |
Y Cable
The Y cable can be used to daisy chain multiple single channel C2Cs. The connector has one DT06-4S and two DT04-4P.
Part number:11329381.
Contact Fairway Hydraulics about the Can 2 Connector
If you are interested in the Can 2 Current, Give us a call on +44 (0)1905 457519 or email us on the form below.